This store requires javascript to be enabled for some features to work correctly.
Sale
Loading...
Original Designs
Historically Inspired. Uniquely Ours
Made in USA
Forged by Hand in Teton Valley, Idaho
From Our Family Forge
Crafted by multi-generation family blacksmiths
Veteran-Powered
US Army Veteran blacksmiths—American grit in every strike.
-
Original Designs Historically Inspired. Uniquely Ours
-
Made in USA Forged by Hand in Teton Valley, Idaho
-
From Our Family Forge Crafted by multi-generation family blacksmiths
-
Veteran-Powered US Army Veteran blacksmiths—American grit in every strike.
These are pointed to screw into wood & other materials. Use them for decorative or structural purposes. The Hex head is a classic look with the possibility to be used for many different applications. Add a little rustic to this classic lag with our hammered or pyramid option.
We recommend nothing below 3/8" for structural applications.
We recommend nothing below 3/8" for structural applications.
-
- Head Shape: Hex
- Head Texture: Hammered
- Size across flats: 1/2"
- Socket Size: 1/2" 8-Point
- Head Height: 3/16"
- Shank Diameter: 5/16"
- Thread Pitch: 9
- Pilot Hole: soft wood 9/64"
- Pilot Hole: hard wood 7/32"
-
- Raw: Metal is left untreated. Recommended for those wanting to add their own finish.
- Black: The part is painted flat black. We recommend this option for parts that have no texturing done to them and for outdoor use.
- Oil Rubbed Bronze: A wax containing bronze is rubbed on the piece, leaving a bronze color to the high points of the metal where the lows will be black. Recommended for hammered or distressed textured items.
- Pewter: A wax containing pewter is rubbed on the part, leaving the silver-ish pewter color on the highs points of the metal and the lows will be black. Recommended for hammered of distressed textured items.
- Aged Bronze: A wax containing bronze is applied to the piece and then wiped away. This finish leaves the high points of the metal black and the low points a goldish-bronze color. Recommended for hammered or distressed items.
- Aged Pewter: A wax containing pewter is applied to the piece and then wiped away. This finish leaves the high point of the metal black and the low points a silver-ish pewter color. Recommended for hammered or distressed items.
- Rusty Metal Patina: This finish leaves the reddish, orange color of the rust on the low points of the piece. It looks best when selected with a hammered or distressed texture
- Gunmetal: This is an acid finish leaving hints of blues and browns coming through the part. The coloring soaks into the metal making it more scratch resistant (Good for high use items).Not recommended for outdoor use
- Wrought Iron Patina: This is an acid was finish, the blackish coloring will soak into the metal making it more scratch resistant (Good for high usu items). Not recommended for outdoor use
Customer Reviews
5.0
Based on 2 Reviews
5 ★
100%
2
4 ★
0%
0
3 ★
0%
0
2 ★
0%
0
1 ★
0%
0
Customer Photos
- Reviews
- Questions
Thank you for posting a question!
Your question will appear on the site once we've answered it.
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Be the first to review this item
Filter Reviews:
×
Clear filters
More Filters
KS
05/18/2021
Kirk S.
United StatesRustic Lag Screws
Exceeded expectations.
5"
JS
04/25/2021
Jerry S.
United StatesHardware
Beautiful workmanship.
2 1/2"
05/13/2021
Thank you!
JL
JoAn L.
04/19/2024
HCL-09-H-1-4x3, I am looking for a screw similar to this to fasten to brick. Can you direct me in the right direction?
Thanks
JoAn
Old West Iron
04/19/2024
A:
You can use this to fasten to brick you just have to have a lag shield concrete anchor. Can buy at a local hardware store.
RF
Robert F.
02/01/2022
Q:
Is the shank length of the 3/8" - 2 1/2" length hammered Hex Lag screw less the .268 head height. Making the shank length 2.232" long.
Answers (1)
Old West Iron
02/10/2022
A:
The length is the measurement from under the head to the end of the shank.
Q
Quinton
09/16/2021
Q:
Do you have any lags that are not threaded all the way to the head? I'm looking for something like the HCL-09-H-1-2-7 1/2" DIA. HAMMERED HEX HEAD LAG in a 7" length, but with (about) a 1 1/2" smooth, un-threaded shank at the head.
Answers (1)
Old West Iron
09/17/2021
A:
Hi Quinton, some of our sizes are not fully threaded. Please give us a call and we can let you know what we have. 844-205-7266 or email office@oldwestiron.com
